The AmbiDeck 18 system really does give the best of both worlds as it provides a low-profile underfloor heating system, which incorporates an insulation layer and can be tiled directly onto. AmbiDeck 18 consists of a high-density XPS insulation panel, 18mm thick. The face of the panel is cement-coated, making it rigid and durable. It is grooved to take 12mm UFH pipework, with a radius return grooved into each panel, making the panel universal. Additional pipework channels can easily be routed / grooved into the panel. AmbiDeck 18 must be laid onto a flat and level subfloor, which can either be concrete or timber based. Over a concrete floor, we recommend laying the AmbiDeck 18 panels over a combed layer of flexible tiling adhesive. Over a timber floor, we recommend securing the panels down with screws, using the AmbiDeck washers.Â
Tiles and wood flooring can be laid directly over this system.
Other finishes such as carpets or vinyl will require an intermediate board layer, prior to the finish being installed.
Please note: Using AmbiDeck with timber or carpeted floor finishes gives a lower heat output, however this can be improved by applying a conductive layer, like self-levelling compound or cement board prior to the floor finish.
SYSTEM FACTS
- Ultra slim floor build up
- Suitable for both new and refurbishment applications
- Specifically designed for tiled floor finishes